NETGEAR PLW1010 Essentials |
The first thing to try is to locate the Wi-Fi base station (also known as gateway, wireless router, or wireless access point) as near to the center of the desired coverage area as possible in order to minimize distance, but that may be difficult or impossible, or simply not enough.
If that fails to solve the problem, many people then try so-called wireless range extenders (actually wireless repeaters), but these devices tend to work poorly:
- Additional radio traffic cuts wireless network speed by more than half.
- Interference with other wireless networks may increase, often a problem.
- May be difficult to locate midway between Wi-Fi base station and weak coverage area.
A better solution usually (but not always) is powerline networking, using existing electrical power wiring (instead of radio) to carry network signals between modules, a base module (left unit in accompanying picture) located next to the Wi-Fi base station, connected by cable to a LAN port, and remote module(s) (right unit) in weak coverage area(s), broadcasting secondary Wi-Fi signal(s).
For best results it's important to select name brand products conforming to the AV2 (AV600 or better) standard, such as the TP-LINK TL-PA6010KIT, which includes both a base module and a remote module.
Testing powerline networking is easy: plug the modules into outlets at the desired locations, and green "sync" lights will turn on if they work. (In some cases they won't work due to electrical wiring issues, so be sure to get a return privilege.) Then it's just a straightforward matter of setting up the secondary Wi-Fi signal.
Note:
For best results it's important to select name brand products conforming to the AV2 (AV600 or better) standard, such as the TP-LINK TL-PA6010KIT, which includes both a base module and a remote module.
- TP-LINK TL-PA6010 is an add-on remote module.
- TP-LINK TL-PA6030KIT has 3 Gigabit Ethernet ports at each end.
- NETGEAR PLW1010 Essentials has base and ac Wi-Fi remote modules.
Testing powerline networking is easy: plug the modules into outlets at the desired locations, and green "sync" lights will turn on if they work. (In some cases they won't work due to electrical wiring issues, so be sure to get a return privilege.) Then it's just a straightforward matter of setting up the secondary Wi-Fi signal.
Note: